NORTH EUROPE Denmark
|Website:||Open website in new window|
DO0161 CREW BOAT Crew Boat For Sale
- FROM DIRECT OWNERS -
Under construction. Pending inside outfit.
Price is for the Vessel fully outfitted as per specs.
Displacement Light weight approx.: 16.500 kg
Displacement Full load approx.: 21.500 kg
Built to meet all requirements from Danish Regulatory agencies.
Hull scantling built according to DNV HSLC Code.
Fender is made of hard PUR rubber and has a D profile with a
dimension of approx. 100 x 100 mm.
|Vessel type:||DO0161 CREW BOAT Crew Boat For Sale|
|Class Society:||Hull built to DNV|
|No. of engines:||2|
|Engine model:||Volvo Penta IPS 450|
|Cruising Speed:||21 Knots|
|Maximum Speed:||30 Knots|
|Length over all:||18.90m|
|Hull material:||Glass Fibre|
Total power output (BHP) 660 bhp
Main Engine(s) (make,type) 2 x Volvo Penta IPS 450
Auxiliary engine(s) 1 X 15 KW , diesel generator
Speed maximum 30 knots
Speed cruising 21 knots
2 x IPS 600 units, each of them comprising:
1 x IPS1 Drive system
Built (year and place) 2019,DENMARK
Hull material GRP
Length Overall (m) 18.90 m
Breadth (m) 5.20 m
Draft (m) 1.20 m
3 x Cabins, each of them double.
Two of three cabins have a dedicated toilet with WC and washbasin.
1 x Toilet, with WC, washbasin and separate shower
1 x mess room – kitchen, with a U shaped bench with capacity for 5
persons and a table
The kitchen is placed in the SB front corner and includes a sink, a
microwave, fridge, dishwasher and a stove.
Wheelhouse, changing room and all accommodation has air
The working space on deck comprises approx. 17 m2 in the aft deck
plus 10 m2 on the aft of the main deck, behind the cabin.
Flush main engine hatches.
Black aluminium railings.
Heating in rails and deck surrounding the wheel house
Aft platform with ladder for boat access from the water and MOB
operations. For MOB incidents there is a rail-mounted semi-rigid
rescue net (Dacon Rescue Scoop) operated by the deck crane.
1 x Hydraulic marine crane with winch (500kg, 36m 6mm wire), mod.
FASSI F50A.0.24, with lifting capacity of 355 kg at 9,15 m reach a 590
kg at 6,45 m reach, installed on aft main deck, port side.
1 x Power block with sheave and warping head for hauling, mod
Hydema KB-04. 400kg capacity, installed on aft deck, starboard side.
1 x Hydraulic anchor winch installed in the fore deck, type Maxwell.
1 x Flushing outlet with quick coupling on the aft deck, connected to a
flushing pump. Feed with water from the fresh water tank.
Class Society and Notation Hull built to DNV
All details are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice.
- DO NOT REPRODUCE, CIRCULATE OR ADVERTISE COMPLETELY OR PARTIALLY ANY OF OUR LISTINGS AND/OR CIRCULATIONS WITHOUT EXPRESSED WRITTEN AUTHORISATION -
Note: Indicated location is approximate general area only.