Used Boats: 79 Adverts Displaying: 1-10
38′ x 10′ Russel Brothers Project Boat
•Price: $15,000 CDN
•Molded depth 5.5′, Draft 4′
•Headroom: Wheelhouse – 6.5′, Cabin 6.5′, Engine room 6.5′
•Shaft size: 1 3/4″, 29″ prop
•Cruising speed: est 9 knots
•CAT engine, hours unknown, 200hp
•Twin disc transmission
•Fuel capacity: 200 gallons
•Accommodations: room for 1 or 2
•Brass wheel and throttle
Location: Northern Ontario...
read more
Year: | 1950 |
Length: | 38' |
Location: | Ontario Canada |
Price: | $15,000 |
View Details |
2006 30.20m x 8.60m x 3.60m 28BP Tugboat
Classification : NK Class
Construction : ABS Grade A mild steel
Port of Registry : Sarawak, Malaysia
Year Built : 2006
Gross Tonnage : 269 tons
Net Tonnage : 81 tons
Length, overall : 30.20 meter
Beam, MLD : 8.60 meter
Depth MLD : 4.30 meter
Draft : 3.60 meter
Compliment : 12 men
Main Engine ...
read more
Length: | 30.20m |
Location: | Malaysia |
Price: | $1,580,000 |
View Details |
New Sectional Barges
Price: CALL FOR PRICING
Built to order sectional barges
Built BY marine contractors FOR marine contractors!
48 Years experience working on the Great Lakes
Specializing in robust heavily framed sectional steel barges built to withstand heavy equipment traffic on deck
Add spuds and hydraulic ramps to load tri-axle dump trucks or other wheeled and tracked equipment
Location: Georgian Bay, Ontario...
read more
1928 26'6" x 8' x 3.6' Steel Replica Tugboat
27' tugboat replica
Boat was originally a lifeboat on a Great Lakes ferry, so has hardly ever been in the water.
All supporting and historical documents will be supplied to buyer at time of sale.
Original boat is constructed of 1/4" steel
Original hull is galvanized at waterline
Stern section and wheelhouse were professionally added and are constructed of 1/8" steel plate
Original hull is riveted and was built in Scotland in 1928
NO rust or weak spots and NO leaks.
Dimensions:
26'6" x 8'...
read more
Year: | 1928 |
Length: | 26' 6" |
Location: | Massachusetts USA |
Price: | $19,950 |
View Details |
33' X 10' Workboat With Winch
Cummins motor
Fitted with a winch
Located in Quebec
Price: $13,250 CDN...
read more
1952 45′ x 13′ Roamer Subchapter M Compliant Model Bow Tug
Price: $225,000 USD
Meet the new workhorse for your fleet! She’s ready to get to work and she’ll get the job done!!
Draft: 5′
Ex USN Portsmouth Lady Submarine Tender
Fresh USCG Subchapter M COI with Great Lakes Route
Powered by 6-71 Detroit, cleanest Detroit around!
Gear is Twin Disc 4.5:1
Topside painted in 2022
Bottom painted in 2021
4 new batteries in 2023
New winches
Safety: all safety gear for USCG new in 2022, fixed fire CO2 system, heat detection and high water alarms
Located in Thousa...
read more
Year: | 2028 |
Length: | 45' |
Location: | New York USA |
Price: | $225,000 |
View Details |
1979 41′ x 14’1 Twin Screw Aluminum UTB/ Workboat/Pilot Boat
Price: $220,000 USD
With fresh coatings and loads of updates, she’s ready to get to work!
Former US Coast Guard vessel
4′ draft
Powered by 2 Cummins 6 cta, 480 hp engines, 500 hours
ZF gears
Electronics: 2 – 12″ Garmins, 2 VHF, radar
New shafts, cutless bearings, couplings, props just reworked
New bottom and hull paint
Comes with lots of spare parts
Location: Mississippi...
read more
Year: | 1979 |
Length: | 41' |
Location: | Mississippi USA |
Price: | $220,000 |
View Details |
New 19′ x 8′ Aluminum Work/Fishing Tiller Boat
Price: Base model starts at $25,000 CDN
Fully welded 3/16″ aluminum hull
Rated for 90hp
Self bailing floor/sole drains overboard
Large waterproof storage areas in bow and sides and covered battery storage in transom
Waterproof breaker panel
LED nav lights
Built in fuel tank with gauge
Capacity 5 people
Custom options available
Location: Western Canada
File ref W2394...
read more
Year: | 2020 |
Length: | 19' |
Location: | Manitoba Canada |
Price: | $25,000 |
View Details |
New 15′ x 68″ Aluminum Work/Fishing Tiller Boat
Price: Base model starts at $6,500 CDN
Fully welded 3/16″ aluminum hull
20″ Transom
Capacity 2-4 people
Options available: custom lighting and power for electronics, mounts for fish finders and trolling motors, flat floor/sole, non-skid coatings on sole and stepping surfaces, removable seats or cushions, extended bow deck and storage compartment, other custom options available!
Location: Western Canada
File Ref W2393...
read more
Year: | 2020 |
Length: | 15' |
Location: | Manitoba Canada |
Price: | $6,500 |
View Details |
1945 35′ x 9′ Russel Brothers Alligator Boat – Project Boat
•Price: $15,000 CDN
•Molded depth 4′, Draft 3′, Height 10.5′
•Shell Plating: 1/4″
•Headroom: Wheelhouse – 7′, Cabin 7′, Engine room 6′
•Shaft size: 1 1/2″, 28″ prop
•Cruising speed: est 9 knots
•Cummins engine, hours unknown, 200hp
•Winch is Russel Bros 50hp, 75 rpm, model 93
•Fuel capacity: 200 gallons
•Brass wheel
File T2398
Location: Northwestern Ontario...
read more
Year: | 1945 |
Length: | 35' |
Location: | Ontario Canada |
Price: | $15,000 |
View Details |