The Challenge is a versatile multi-purpose vessel and has been used as a dive support platform, for ADCP deployment and recovery and for people transport. In addition to this it has also been used for harbour maintenance and support for the larger vessels. One of the characteristics of this vessel is that plant and equipment can be driven onto the vessel and off loaded to larger vessels when on site. It also has an 8 -9 tonne deck load MCA Cat 3Up to 20 miles (from safe haven)... read more

1995 17′ x 6.5′ x 1′ Steel Flat Bottom Jet Propelled Work Boat Price: $3,500 CDN •Jet: Hamilton Jet • Engine: 302 Ford Mercruiser- gas • Top speed 30 to 35mph • Great shallow draft work Boat •Includes single axle trailer Located in Port Dover, Ontario... read more

LOA 27,6 m Beam 7,5 m Built in year 2011 Flag : Spain Gross Tonnage of 212 Deadweight : 226 metric tonnes Engines : 1 x Yanmar / Yanmar Diesel Engine Co Ltd 6AYM-STE, 485 kw, 1.900 rpm, Propellers 1 x Center 1 Deck... read more

947BSB Multicat For Sale & Charter -FROM DIRECT OWNERS- She is an extremely versatile ‘multi-category’ vessel. Offering shallow draft, deck crane, spud legs, and substantial deck space, it is ideally suited to diving, construction, dredging support duties, salvage, and survey work Modified in UK in 2011... read more

Ex Shetland Island car ferry... read more

DO0182 Workboat For Sale - FROM DIRECT OWNERS - New engines (1500 hours from new) and new gearboxes 2:1 added in 2021. CODING – MECAL OTHER INFO: RELIABLE AND EXTREMELY ECONOMICAL SERVICE BOAT WITH AMPLE DECKSPACE VERY RARE TO FIND ALL IN VERY GOOD CONDITION, RECENT OUT OF WATER SURVEY (ANTI-FOULING, ANODES, CUTLASS BEARINGS)... read more

13 metre fast support/dive/ workboat. Ideal for Whale watching or Dolphin watching boat. Yanmar 6LY2H-STE 420hp comercially rated turbo diesel 6 cylinder engine, matched to a new Castoldi 06 model jet drive. It has been measured up and quoted for the fitting of inflatable tubes if required. (£5000.00) Built 2010, and has never been in the water, originally designed as a support/maintenance vessel for offshore wind farms. Bow platform is for pushing on to wind turbines, docks, or other vessels for boarding or disembarking. Basic electronics/communication package. Fibreglass hull, heavy ... read more

Conver C 480-H Weed cutting boat, excellent Mitsubishi 2.5 litre 4 cylinder diesel engine with closed keel cooling. 2006 model with only 640 hours run time. Rarely available, Ex U.K Environment agency boat, which has been meticulously maintained with regular servicing and safety inspections. All in good working order with no water or hydraulic leaks. approx 6 metres x 1.85 metres , 1840kg. (Trailer is not included), cutting blade tilts forward and lowers approximately 2 metres below the water, and also rotates left and right to cut bankside vegetation. Service kit included, complete with spar... read more

General details as follows: LOA 23,35 m Beam 8 m Draft 1,9 m Bollard Pull : 23 tons Speed : 10,5 knots Engines : 2 x Caterpillar / Caterpillar Inc 3412D, 1.302 kw, 2.100 rpm, Propellers 1 Fixed Pitch (Port Side) + 1 Fixed Pitch (Starboard) Auxiliaries Engines : Bowthruster + No Sternthruster (1 Bow Tunnel thruster 74kw) Free Deck area about 45m² Capable of supplies of 45m³ Fuel Oils, 3m³ Methanol, 13m³ FW and 1m³ Brine Cranes / Gears installed with a max lifting capacity of 5,3 tons Built in year 2007 Design is : Damen SB 2308 Class : Bureau Veritas Flag : Netherlands Gross To... read more

LOA 21 m Beam 6 m Draft 5,7 m Built in year 2009 Class : China Corporation Register Flag : Taiwan Gross Tonnage of 76 and Nett Tonnage of 22 Deadweight : 48 metric tonnes Bollard Pull : 1 tons Total 5 berths 1 cabin with 1 berth 1 cabin with 4 berths Speed : 10,93 knots Engines : 2 x Diesel Engines, 588 kw, Propellers 2 x... read more