All Tug Commercial Vessels for sale
Contact us for details... read more
A very solid alloy tug in fantastic condition overall. Vessel being sold, as is where is. Currently on the hardstand with one engine out after being fully rebuilt and ready to install. Large list of spare parts. Surveys have been suspended pending re-powering. Located Fremantle, Western Australia.
NOTE - One motor is currently bad and the vessel is for sale at a retail asking price of AU$525,000 with one good ME, one bad ME plus one brand new spare engine un-installed. Or for AU$675k the vendor will install the new engine and put the boat on the slip and give it a fresh survey.... read more
|Price:|| $525,000 Ex. Tax|
1111BSB TUG Twin Screw Tug For Sale & Charter
- FROM DIRECT OWNERS -
Two overhauled main engines and overhauled auxiliary Dec 2019.
Owners could deliver her with new IACS class against an €85,000
higher price tag. Vessel currently operating but could be made
available for delivery end 2019.
Bollard Pull 16 tons
Gearboxes 2 x Reintjes WAF 264L, 4.5:1 reduction
Propellers Fixed pitch propellers.
Nozzels 2 x 1350 mm Van de Giessen Optima with st. st. Innerrings
Rudders 2 x streamlines, double plates.
Ste... read more
Twin Screw 14.8 mtr Tug Boat
2 x 400 HP Yanmar Mains
5 to 1 Gearbox'
Fixed Kort Nozzles
10 Tonne Bollard Pull
New Build... read more
|Price:|| $1,200,000 Tax Not Paid|
The Harbour Tug is intended to assist vessels in harbours and near-by waters and serve as a fire-fighting tug in limited fire-fighting capacity. To achieve extremely good manoeuvrability and versatility as well as reasonable draught the vessel is equipped with two 360° steerable propulsion units in the aft. Insulated and ventilated accommodation, including the wheelhouse, is suitable for the Norway environment. Provision for accommodation of 2+2 persons will be made.... read more
Class Single Unit Tractor Tug (SUTT)
Builder Richard Dunston (Hessel) ltd
Year of Build 1974
Summary Full range of harbour work; pulling, pushing and side towing of surface ships, barges and berthing
aids in confined waters and assisting at sheltered anchorages;
Previously operated in category C and D regional waters in and around Portsmouth harbour.
Length overall (inc. fenders) 22.0
Beam (inc. fenders) 6.4
Depth at side (at half length) 2.6
Weight Light Ship ( dead weight for lifting) 126 ton
Cl... read more
Red Countess is a 15.75 Delta Tug, she is very handy and versatile for a multitude of roles. Powered by twin Gardner 8L3Bs @ 250hp each, with less than 10,000 hours on the clocks, through Twin Disc MG514C boxes to fixed props she is very economical and delivers a solid 5 tbp.
With a fly bridge and good all round visibility from the wheelhouse she is ideal for working within confined spaces and with barges but also perfectly at home towing in open waters. She has the usual array of electronics and deck equipment all owned. Having only had 2 owners from build in Holland she has been very well c... read more
|Location:||South Ayrshire UK|
|Price:|| £250,000 Tax Exempt|
1945 35′ x 9′ Russel Brothers Alligator Boat – Project Boat
•Price: $15,000 CDN
•Molded depth 4′, Draft 3′, Height 10.5′
•Shell Plating: 1/4″
•Headroom: Wheelhouse – 7′, Cabin 7′, Engine room 6′
•Shaft size: 1 1/2″, 28″ prop
•Cruising speed: est 9 knots
•Cummins engine, hours unknown, 200hp
•Winch is Russel Bros 50hp, 75 rpm, model 93
•Fuel capacity: 200 gallons
Location: Northwestern Ontario... read more
DO0105 TUG Twin Screw Tug For Charter
FROM DIRECT OWNERS
Is a twin-screw motor tug, certificated under the MCA Workboat
Code of Practice for operation up to 60 miles offshore. She is
available for towage and survey works throughout the UK.
Bollard Pull: 10 tons
Max Speed (Light): 10 knots
Fuel Capacity: 6 tons
Propulsion: 2 x FPP in fixed nozzels
Ancillaries: 5t Deck Winch / Bowthruster... read more