FINANCE AVAILABLE – NEW AMPHIBIOUS DREDGER. Imagine having a dredger that is road transportable, able to unload itself from the lorry and can dredge rivers, canals, Marinas up to 3.75m. This fantastic vessel can walk into the water and has no propeller or jets to get blocked by the weed. Designed and built to suit your specification this vessel can be fitted with a boom mounted jack hammer, grab bucket or 2m wide weed cutting bucket. If you are in the market for a versatile dredger then your first step should be to contact either Greig or Robert and discuss the various options available for this vessel.

This unit is powered by a four cylinder water cooled diesel engine. At 63BHP @ 2000rpm she is able to produce enough energy to carry out a variety of tasks such as pile driving, grab and weed cutting buckets. Access to the engine is via panels fitted front and rear of the deck. The dredger has three stabilising legs fitted with pairs of large hollow drum wheels which provide both the stability and flotation. The full 3600 slew has an automatically braked slew motor.

This vessel has been designed for use throughout the world and is equally at home in warm tropical waters or working in or around the icy waters of Canada or Northern climates. Special features include:-

•Spacious Cab to ROPS and FOPS standards.
•Raked front screen to prevent glare from the water.
•Built in ventilator and split screen.
•Sliding window to the wide access door.
•Side window with rip pull for safety exit.
•Sprung seat with lumber support, for additional comfort on long working days.
•Seat adjustment for height, rake and weight of operator.
•Two speed fresh air fan and heater.


The hull has again been designed for maximum safety for the operator. The hull has a “Y” shaped internal configuration to provide four water tight compartments. These compartments can double up as dry storage compartments as access panels are fitted to each compartment.

Every detail has been though of over the last 30 years of construction down to the fitting of an outboard motor bracket for additional safety.
Standard Unit:
•Length: 9.05m
•Width: 2.5m
•Draft: 0.5m
•Weight: 7.5 Tonnes
•Digging Depth: 2.75m over stern
•3.75m over side
•Engine: 63BHP @ 2000rpm
•Reach: 7m
•Unloading height: 5.55m
•Air Draught with cab: 2.2m
•Air Draught with cab top removed: only 1.6m
•Slew: 360Deg
•Bucket Capacity: 200 Litres
ACCESSORIES:-
•Crane to assist with removal of top of cab
•Full range of buckets
•Full air conditioning
•Window Blinds
•Seat Belt
•Hydraulic propulsion with power steering
•Vandal proof shutters
•Operators workstation with sun canopy
•Boom mounted Jack hammer
•Pile driving compactor
•Grabs up to 160 Litre capacity
•Weed cutting buckets up to 3m wide
•Depth monitoring gauge
•Water pump
•Bilge pump
•Outboard motor
•Telescopic legs to give up to 4.25 digging depth.

ACCESSORIES:-
•Crane to assist with removal of top of cab
•Full range of buckets
•Full air conditioning
•Window Blinds
•Seat Belt
•Hydraulic propulsion with power steering
•Vandal proof shutters
•Operators workstation with sun canopy
•Boom mounted Jack hammer
•Pile driving compactor
•Grabs up to 160 Litre capacity
•Weed cutting buckets up to 3m wide
•Depth monitoring gauge
•Water pump
•Bilge pump
•Outboard motor
•Telescopic legs to give up to 4.25 digging depth.

The details of this vessel is offered in good faith but cannot be guaranteed. Nor can we warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.